/
/
Rangoli Total Care

Rangoli Total Care

Rangoli

Conforms to ISI/IGBC & GRIHA Specifications

Product Composition

Rangoli Total Care is formulated with special types of co-polymers and fine pigments available in India with special additives like anti-fungal, anti-algae, anti-fading, to get optimum dispersion level, etc. It gives a rich matt look when applied on a zero undulated surface. It gives excellent coverage and durability for interior walls when applied by proper methods.

USP: Butter-like smoothness, high coverage, anti-fungal and anti-algae, improved whiteness, rich matt finish.

Usage area: On plastered surfaces.

PRODUCT DATASHEET

DIRECTIONS FOR USE

Surface preparation:

For fresh/new surfaces:

  1. Sand the surface with Emery Paper No.80 and wipe clean
  2. Apply first coat of primer and allow to dry for 6-8 hours
  3. Apply thin coats of putty to fill dents
  4. Allow putty to dry overnight
  5. Sand with Emery Paper No.100 and wipe clean
  6. Apply second coat of primer and dry for 6-8 hours
  7. Sand with Emery Paper No.220 and wipe clean

For previously painted surfaces: Strip all old paint and remove loose particles before starting above process.

Direction for application:

  1. Dilute paint as per recommended dilution ratio
  2. Strain with thin cloth
  3. Apply first finishing coat and dry for 6-8 hours
  4. Apply second coat after first coat dries
  5. Allow to dry overnight

COVERAGE*

Application Method No. of coats New surface
Brush Application 2 coats 100-120 sq ft
Roller Application 2 coats 100-120 sq ft

*It depends on many factors like surface conditions, surface preparation, application skill, weather conditions, dilution etc. The coverage mentioned is under ideal conditions and will vary depending on site conditions. Coverage may be less for darker shades compared to pastel shades.

RECOMMENDED UNDERCOATS

Primers For walls or plastered surfaces – BP Cement Primer WT (Alkali Resistant)
Putty For walls or plastered surfaces – Bison Wall Putty/Happy Wall Putty

PACKS

White and P0 ColorBank Bases (ColorBank) Offered shade range
1 ltr, 4 ltr, 10 ltr, 20 ltr 0.9 ltr, 3.6 ltr, 9 ltr, 18 ltr W1, N, N2, Cream, Yellow, Red Over 2000 shades

TECHNICAL DATA

1 Recommended Thinner Potable water
2 Recommended Surfaces Sand/cement plaster surface, asbestos, brickwork, concrete block, fibreboard
3 Method of Application Brush, roller or spray
4 Dilution Ratio For brush application 500 ml of water/lt of emulsion. Note: In case of N base shades, no dilution is advised to ensure proper colour depth.
5 Number of Coats Required Apply 2 coats of Rangoli for re-painting provided the colour is same. For fresh painting it is advisable to give 3 coats for a rich look.
6 Drying Time SD: 15 – 25 minutes depending on weather conditions. HD: 3-4 hours
7 Gloss Level 10 – 25 at 85° GH on a glass plate when released at 300 micron DFT applied by box coater
8 Flash Point 100% water-based paint, hence NR
9 Fire Hazard Class Non-flammable
10 Pot life of Thinned Material Overnight
11 VOC 37 gm/ltr
12 Density Depends on bases
13 Certification IS:15489
14 Safety Data Refer MSDS

POINTS TO NOTE

  • Shake well before use and do not over dilute
  • Strain the material through a fine sieve before use
  • Keep the container tightly closed to prevent drying
  • Use 1 coat of Bio-Wash for killing fungal growth
  • Scrape off old paint thoroughly before painting starts
  • Gyroshake well after tinting through CB machine
  • Colourants to be added in case of base paints only
  • For deeper shade apply 1 additional coat
  • Do not apply paint on lime washed surfaces and damp wall
  • In case of contact with eyes, wash immediately with water and seek medical advice

CLEANING INSTRUCTIONS

  • Use only a toilet soap to clean stains, do not use detergents
  • Use only a soft white cotton cloth for cleaning
  • While cleaning, wipe gently without using pressure
  • Attempt cleaning the surface only after one month of application

Version No: BPP2/04/2016. Please note that this data sheet supersedes all previous versions.

BERGER PAINTS INDIA LIMITED
Berger House, 129 Park Street, Kolkata 700 017
CONSUMER RELATIONS MANAGER Ph: 1800-103-6030
Fax: 91-33-2249-9729/9009 | SMS BERGER to 56767
Email: consumerfeedback@bergerindia.com | www.bergerpaints.com