Menu
Apcothane 675 White
FEATURES & RECOMMENDED USE
- Designed as a finish coat in epoxy / polyurethane systems
- Good mechanical properties
- Good resistance to atmospheric exposure
- Good aged recoatability
- Good gloss and colour retention
- Easy application by brush and spray
PRODUCT DATASHEET
TECHNICAL DATA
| Property | Description |
|---|---|
| Colour Range | – |
| Gloss | Glossy |
| Volume Solids | Approx. 45% |
| Recommended DFT / Coat | 25 – 35 µm |
| Theoretical Covering Capacity | 18.0 m²/l @ 25 µm DFT 12.9 m²/l @ 35 µm DFT |
| Drying Time at 30°C | Surface Dry: 1 hour Hard Dry: 16 hours Full Cure: 7 days |
| Overcoating Interval at 30°C | Minimum: 16 hours Maximum: Unlimited, provided surface is cleaned from all contamination |
| Shelf Life | At least 12 months (stored cool and dry) |
| Flash Point (Base) | Not less than 24°C |
| Flash Point (Hardener) | Not less than 24°C |
DIRECTIONS FOR USE
Surface Preparation & Substrate Condition
- Suitable epoxy primer or epoxy / polyurethane undercoat, which should be dry and free from all surface contamination.
- In case of aged epoxy coating, the surface should be sufficiently roughened prior to painting.
- Substrate temperature should be at least 3°C above dew point but not above 50°C.
Mixing
- Stir the base and hardener separately.
- If settling is observed in the base, loosen the material with a hand stirrer followed by a power-driven stirrer for homogeneous mixing.
- Mix hardener gradually into the base under continuous stirring.
| Mixing Ratio (by volume) | Base : Hardener = 14 : 1 |
|---|---|
| Induction Time | 15 minutes |
| Pot Life @ 30°C | 2 hours |
Note:
In case of part mixing (which should be avoided), close lids of containers tightly to prevent contact with atmospheric moisture.
Application
| Method | Recommended Thinner | Volume of Thinner | Nozzle Orifice | Nozzle Pressure |
|---|---|---|---|---|
| Air Spray | T-213 | 5 – 20% | 1.5 – 3.0 mm | 0.3 – 0.4 MPa (≈3–4 atm; 43–57 psi) |
| Airless Spray | T-213 | 0 – 10% | 0.28 – 0.33 mm | 10 – 13 MPa (≈100–130 atm; 1400–1800 psi) |
| Brush / Roller | T-213 | 0 – 5% | – | – |
STORAGE & PACKING
- Packing: 10 litres
- Storage: Store in a cool, dry place, in accordance with local regulations.
SAFETY INFORMATION
- As a general safety measure, avoid inhalation of solvent vapours or paint mist and contact of liquid paint with skin and eyes.
- Forced ventilation should be provided when applying paint in confined spaces or stagnant air.
- Even when ventilation is provided, respiratory, skin, and eye protection are always recommended during spray application.
- Refer to the Material Safety Data Sheet (MSDS) prior to use.
References
Product Data Sheet – APCOTHANE CF 675 (Aliphatic Polyurethane Coating)
Issued by Asian Paints Ltd. – December 2009
Document Version: PC 0443
Source: https://www.asianpaints.com
Technical Guidelines and Explanatory Notes
Last accessed: 28 May 2025
Reference link: https://www.asianpaints.com/service-support/technical-guidelines
Note: Always consult the latest version of the Product Data Sheet and associated technical documents directly from Asian Paints’ official website to ensure accuracy and compliance with the most current recommendations.
Delivering Trusted Paint Solutions Since 1978. Authorized Distributor of 13+ Leading Paint Brands Across India.
OPENING HOURS
-
Monday - Sunday
08:00AM - 08:00PM