Nerolac Ancillary Paints
1
Wood Primer (Solvent Thinnable)
2
Beauty Acrylic Distemper
3
Goody Synthetic Distemper
4
Nerolac Wall Putty
5
Nerolac Cement Primer
6
Goody Universal Primer
7
Nerolac Exterior Primer
8
Goody Red Oxide Metal Primer
9
Goody Universal Primer White (Solvent Thinnable)
10
Cement Primer White (Solvent Thinnable)
11
Cement Primer White (Water Thinnable)
12
Red Oxide Metal Primer
Wood Primer (Solvent Thinnable)
Nerolac Wood Primer is a specially formulated primer for application on wooden substrates. It is based on synthetic resin medium and balanced combination of pigments and extenders. It penetrates into wood fibres and forms an excellent barrier on the substrate and serves as a sound base for the application of subsequent finishing coats.
Product Information Sheet| Coverage | On Smooth non absorbent surface. 150 – 170 sq. ft/ltr/coat |
|---|---|
| Drying Time | Surface Dry: Max 1 hr |
| Gloss Levels/ Sheen levels | Matt |
| Thinning | Upto 30% by volume using Nerolac Gereral Purpose Thinner |
| Flash Point | N ot below 30°C< |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 1 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
| Packaging | 1 ltr, 4 ltrs., 10 ltrs. & 20 ltrs. |
| Shade Range | White and Pink |
Performance Features And Benifits
- Excellent Adhesion to substrate
- Very good sealing property
- Very good intercoat adhesion
- Ease of application
- Good Hardness.
Recomanded Usage
- Nerolac Wood Primer can be applied on all types of wooden substrate such as door frames, windows, furnitures,etc.
Surface Preparation
- Ensure the surface is clean, dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area using Nerolac Fungicidal Solution. Allow to react for 6 – 8 hrs. Apply a coat of Nerolac Wood Primer before application of required top coats.
Beauty Acrylic Distemper
Ancillaries to keep the paint everlasting Nerolac Cement Primer(Water thinnable) or Goody Universal Prime & Nerolac Wall Putty (Interior).
Nerolac Acrylic Distemper is supplied in paste form, and it can be used for the decoration of fully matured plasterwork, concrete, brickwork and asbestos surfaces. The paste is bound with a stable acrylic medium.
Product Information Sheet| Coverage | On Smooth non absorbent surface. 150 – 170 sq. ft/ltr/coat |
|---|---|
| Drying Time | Surface Dry: 30 minutes. |
| Gloss Levels/ Sheen levels | Matt |
| Thinning | Upto 30% by volume using Nerolac Gereral Purpose Thinner |
| Flash Point | NA |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 1 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
| Packaging | 1 kg, 2 kg, 5 kg, 10 kg & 20 kg. |
| Shade Range | As per colourscapes fandeck & shade card. |
Performance Features And Benifits
- Economical Distemper
- Ease of application
- Good washability
- Eye soothing matt finish.
Recomanded Usage
- Nerolac Acrylic Distemper is recommended for interior use only. It can be applied on ceilings and wall surfaces where a matt finish, free from irritating glares due to light reflection is desired.
Surface Preparation
- Ensure the surface is clean, dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area using Nerolac Fungicidal Solution. Allow to react for 6 – 8 hrs. Apply a coat of suitable Primer* followed by Nerolac Wall Putty to level the dents and make the surface uniform. Apply again a coat of suitable Primer*. Then apply two to three coats of Nerolac Acrylic Distemper.
Goody Synthetic Distemper
Ancillaries to keep the paint everlasting Nerolac Cement Primer(Water thinnable) or Goody Universal Prime & Nerolac Wall Putty (Interior).
Goody Synthetic Distemper is a product specially developed in the economy range for customers residing in rural and semi-urban areas. It gives a pleasant smooth finish on walls at an economic price, and offers a favourable substitute for the lime wash (chuna) application, at a comparable price. The product is supplied in paste form and can be applied on plasterwork, concrete, brickwork and asbestos surfaces for protection and decoration.
Product Information Sheet| Coverage | On Smooth non absorbent surface. 150 – 170 sq. ft/ltr/coat |
|---|---|
| Drying Time | Surface Dry: 30 minutes. |
| Gloss Levels/ Sheen levels | Matt |
| Thinning | Add 1 Lit of Water in 1.5 Kg of Distemper. |
| Flash Point | NA |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 1 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
| Packaging | 1 kg pouch. |
| Shade Range | Supplied as Ujala (White) and other attractive and shades as shown in the product shade card. |
Performance Features And Benifits
- Very economical product
- Smooth and pleasant matt finish
- Ease of application
- No priming of the substrate.
Recomanded Usage
- Goody synthetic distemper is recommended for interior use only. It can be applied on ceilings and wall surfaces where a smooth matt finish is desired with an economic advantage.
Surface Preparation
- Ensure the surface is clean, dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area using Nerolac Fungicidal Solution. Then apply two to three coats of Goody Synthetic Distemper.
Nerolac Wall Putty
Nerolac Wall Putty is specially made by using an ideal combination of White Pigments, Extenders, Acrylic Emulsion Medium and Additives.
Product Information Sheet| Drying Time | Surface Dry: 30 minutes. |
|---|---|
| Gloss Levels/ Sheen levels | Matt |
| Thinning | Maximum 5% with Water |
| Flash Point | NA |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 1 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
| Packaging | 1 ltr, 4 ltrs., 10 ltrs. & 20 ltrs |
| Shade Range | White |
Performance Features And Benifits
- Dries quickly
- Very good filling and cutting properties.
- Ease of application
Recomanded Usage
- For filling of dents and imperfections and levelling on primed wall, wooden and metallic surfaces prior to application of subsequent coats. It is used for Interior application only.
Surface Preparation
- Ensure the surface is clean, dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area using Nerolac Fungicidal Solution. Allow to react for 6 – 8 hrs. Apply a coat of suitable Primer* followed by Nerolac Wall Putty to level the dents and make the surface uniform. Apply again a coat of suitable Primer* before applying subsequent top coats.
Nerolac Cement Primer
Nerolac Exterior Primer is a water based wall coating suitable for application on exteriors as an Primer to exterior emulsions.
Product Information Sheet| Coverage | On normal masonry surface by brushing: 130 – 150 sq. ft/ltr/coat |
|---|---|
| Drying Time | Surface Dry: 30 minutes. |
| Gloss Levels/ Sheen levels | Matt |
| Thinning | 100% by volume with Water Top Coat – Thin 40% by volume with water. |
| Flash Point | NA |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 1 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
| Packaging | 1 ltr, 4 ltrs., 10 ltrs. & 20 ltrs. |
| Shade Range | White |
Performance Features And Benifits
- Nerolac Exterior Primer has good opacity and whiteness, which helps improve the appearance of the emulsion topcoats. Nerolac Exterior Primer does not chalk and can be applied on freshly plastered surfaces that are Adequately cured. Nerolac Exterior Primer does not required any water curing.
Recomanded Usage
- Nerolac Exterior Primer can be applied on a wide range of exterior cement plasters, exterior, ceilings, asbestos sheet, concrete etc. as an primer.
Surface Preparation
- The surface to be painted must be free of all dust grease, traces of paint flakes, algae, fungus, etc. The surface previously coated with paint must be cleaned thoroughly with a stiff wire brush, to remove dust, dirt chalking or any friable material. This ensures proper adhesion of the new paint system. In case of fungus affected area apply a liberal coat of Nerolac Fungicidal Solution. Allow it to react for minimum 6 – 8 hrs. All structural cracks must be open in V shape filled with White Cement / Cement based Plasters, all leakage should be stopped, before actual painting. Freshly plastered surfaces must be allowed to cure completely. Apply top coats as follows
Goody Universal Primer
Goody Water Thinnable Cement Primer is an economical water thinnable primer, specially formulated by dispersion of White pigments and extenders in a copolymer Emulsion Medium. It is suitable for Interior application for priming of plastered surfaces and other masonry works. It makes the surface less absorbent.
Product Information Sheet| Coverage | On Smooth non absorbent surface. 150 – 170 sq. ft/ltr/coat. |
|---|---|
| Drying Time | Surface Dry: Max 1 hr |
| Gloss Levels/ Sheen levels | Matt |
| Thinning | Upto 30% by volume using Nerolac Gereral Purpose Thinner |
| Flash Point | N ot below 30°C< |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 1 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
| Packaging | 1 ltr, 4 ltrs., 10 ltrs. & 20 ltrs. |
| Shade Range | White |
Performance Features And Benifits
- Good adhesion to substrate
- Very good intercoat adhesion
- Ease of application
- Good Hardness.
Recomanded Usage
- Goody Universal Primer can be applied on plastered surfaces, asbestos sheets, concrete, brick works, wood etc. prior to over coating with solvent based or water based paints.
Surface Preparation
- Ensure the surface is clean, dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area using Nerolac Fungicidal Solution. Allow to react for 6 – 8 hrs. Apply a coat of Nerolac Wood Primer before application of required top coats.
Nerolac Exterior Primer
Nerolac Exterior Primer is a water based wall coating suitable for application on exteriors as an Primer to exterior emulsions.
Product Information Sheet| Coverage | On normal masonry surface by brushing: 130 – 150 sq. ft/ltr/coat |
|---|---|
| Drying Time | Surface Dry: 30 minutes. |
| Gloss Levels/ Sheen levels | Matt |
| Thinning | 100% by volume with Water Top Coat – Thin 40% by volume with water. |
| Flash Point | NA |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 1 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
| Packaging | 1 ltr, 4 ltrs., 10 ltrs. & 20 ltrs. |
| Shade Range | White |
Performance Features And Benifits
- Nerolac Exterior Primer has good opacity and whiteness, which helps improve the appearance of the emulsion topcoats. Nerolac Exterior Primer does not chalk and can be applied on freshly plastered surfaces that are Adequately cured. Nerolac Exterior Primer does not required any water curing.
Recomanded Usage
- Nerolac Exterior Primer can be applied on a wide range of exterior cement plasters, exterior, ceilings, asbestos sheet, concrete etc. as an primer.
Surface Preparation
- The surface to be painted must be free of all dust grease, traces of paint flakes, algae, fungus, etc. The surface previously coated with paint must be cleaned thoroughly with a stiff wire brush, to remove dust, dirt chalking or any friable material. This ensures proper adhesion of the new paint system. In case of fungus affected area apply a liberal coat of Nerolac Fungicidal Solution. Allow it to react for minimum 6 – 8 hrs. All structural cracks must be open in V shape filled with White Cement / Cement based Plasters, all leakage should be stopped, before actual painting. Freshly plastered surfaces must be allowed to cure completely. Apply top coats as follows
Goody Red Oxide Metal Primer
Goody Red Oxide Primer is a economical General Purpose Metal Primer based on Synthetic Resin medium and Red Oxide of Iron as anti corrosive pigment.
Product Information Sheet| Coverage | On smooth non absorbant surface 130 – 150 sq. ft/ltr/coat. |
|---|---|
| Drying Time | Surface Dry: Max 1 hr |
| Gloss Levels/ Sheen levels | Matt |
| Thinning | Upto 30% by volume using Nerolac Gereral Purpose Thinner |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 3 months from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. |
| Packaging | 20 ltrs. |
| Shade Range | Red Oxide. |
Performance Features And Benifits
- Very good adhesion to the surface
- Air drying cum stoving type.
Recomanded Usage
- Goody Nerolac Red Oxide Primer is a General Purpose Primer for application on Iron and Steel surfaces.
Surface Preparation
- Ensure the surface is clean, dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area using Nerolac Fungicidal Solution. Allow to react for 6 – 8 hrs. Apply a coat of Nerolac Wood Primer before application of required top coats.
Goody Universal Primer White (Solvent Thinnable)
Goody Universal Primer White is formulated by using synthetic resin medium and suitable combination of pigments and extenders so as to ensure deep penetration and sealing of porous surfaces. It is suitable for interior application for priming of plastered surfaces and other masonry works. It makes the surface less absorbent.
Product Information Sheet| Coverage | On Smooth non absorbent surface. 150 – 170 sq. ft/ltr/coat |
|---|---|
| Drying Time | Surface Dry: Max 1 hr |
| Gloss Levels/ Sheen levels | Matt |
| Thinning | Upto 30% by volume using Nerolac Gereral Purpose Thinner |
| Flash Point | N ot below 30°C< |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 1 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
| Packaging | 1 ltr, 4 ltrs., 10 ltrs. & 20 ltrs. |
| Shade Range | White |
Performance Features And Benifits
- Good adhesion to substrate
- Very good intercoat adhesion
- Ease of application
- Good Hardness.
Recomanded Usage
- Goody Universal Primer can be applied on plastered surfaces, asbestos sheets, concrete, brick works, wood etc. prior to over coating with solvent based or water based paints.
Surface Preparation
- Ensure the surface is clean, dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area using Nerolac Fungicidal Solution. Allow to react for 6 – 8 hrs. Apply a coat of Nerolac Wood Primer before application of required top coats.
Cement Primer White (Solvent Thinnable)
Nerolac Cement Primer White is formulated by using synthetic resin medium and ideal combination of pigments and extenders so as to ensure deep penetration and sealing of porous surfaces. It is pigmented white to give reasonable opacity to the primer. It is suitable for interior application for priming of plastered surfaces and other masonry works. It makes the surface less absorbent.
Product Information Sheet| Coverage | On Smooth non absorbent surface. 150 – 170 sq. ft/ltr/coat |
|---|---|
| Drying Time | Surface Dry: Max 1 hr |
| Gloss Levels/ Sheen levels | Matt |
| Thinning | Upto 30% by volume using Nerolac Gereral Purpose Thinner |
| Flash Point | N ot below 30°C< |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 1 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
| Packaging | 1 ltr, 4 ltrs., 10 ltrs. & 20 ltrs. |
| Shade Range | White and Pink |
Performance Features And Benifits
- Excellent Adhesion to substrate
- Good resistance to alkali
- Seals dry porous surfaces
- Very good intercoat adhesion
- Ease of application
- Good Hardness.
Recomanded Usage
- Nerolac Cement Primer White can be applied on plastered surfaces, asbestos sheets, concrete, brick work, etc. prior to over coating with solvent based or water based paints.
Surface Preparation
- Ensure the surface is clean, dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area using Nerolac Fungicidal Solution. Allow to react for 6 – 8 hrs. Apply a coat of Nerolac Wood Primer before application of required top coats.
Cement Primer White (Water Thinnable)
Nerolac cement primer water thinnable is formulated by using copolymer emulsion and ideal combination of pigments and extenders so as to ensure deep penetration and sealing of porous surfaces. It is pigmented white to give reasonable opacity to the primer. It is suitable for interior application for priming of plastered surfaces and other masonry works. It makes the surface less absorbent.
Product Information Sheet| Coverage | On Smooth non absorbent surface. 150 – 170 sq. ft/ltr/coat |
|---|---|
| Drying Time | Surface Dry: 30 minutes. |
| Gloss Levels/ Sheen levels | Matt |
| Thinning | Upto 30% by volume using Nerolac Gereral Purpose Thinner |
| Flash Point | N ot below 30°C< |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 1 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
| Packaging | 1 ltr, 4 ltrs., 10 ltrs. & 20 ltrs. |
| Shade Range | White |
Performance Features And Benifits
- Excellent Adhesion to substrate
- Very good sealing property
- Very good intercoat adhesion
- Ease of application
- Good Hardness.
Recomanded Usage
- Nerolac cement primer water thinnable can be applied on plastered surfaces, asbestos sheets, concrete, brickwork, etc. prior to over painting with water-based paints. It is used for Interior application only.
Surface Preparation
- Ensure the surface is clean, dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area using Nerolac Fungicidal Solution. Allow to react for 6 – 8 hrs. Apply a coat of Nerolac Wood Primer before application of required top coats.
Red Oxide Metal Primer
Nerolac Red Oxide Primer is a General Purpose Metal Primer based on Synthetic Resin medium and Red Oxide of Iron as anti corrosive pigment.
Product Information Sheet| Coverage | On Smooth non absorbent surface. 150 – 170 sq. ft/ltr/coat |
|---|---|
| Drying Time | Surface Dry: Max 1 hr |
| Gloss Levels/ Sheen levels | Matt |
| Thinning | Upto 30% by volume using Nerolac Gereral Purpose Thinner |
| Flash Point | Not below 30°C< |
| Stability of Thinned Paint | Use within 24 hrs |
| Shelf Life | 1 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
| Packaging | 200ml, 500ml, 1 ltr, 4 ltrs, 10 ltrs & 20 ltrs. |
| Shade Range | Red Oxide. |
Performance Features And Benifits
- Good anti corrosive properties
- Very good adhesion to the surface
- Air drying cum stoving type.
Recomanded Usage
- Nerolac Red Oxide Primer is a General Purpose Primer for application on Iron and Steel surfaces.
Surface Preparation
- Ensure the surface is clean, dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area using Nerolac Fungicidal Solution. Allow to react for 6 – 8 hrs. Apply a coat of Nerolac Wood Primer before application of required top coats.